Textile Water-based Inks 2018-10-03T10:12:16+00:00

Magna-Colours-sml

Textile Water-based Inks

The products listed below are kept in stock. Those not listed are available and can be supplied by special order.

Magna Colours Discharge

  • MagnaPrint® Discharge Base ULF – clear discharge base for strong, bright shades.
  • MagnaPrint® Discharge Blending White ULF – semi white discharge base for pastel shades can also be used as discharge underbase.
  • MagnaPrint® Discharge Super White ULF – ready made white discharge base for white shades.
Data Sheet

4_leaf

Patented Formaldehyde Free Discharge System.

Data Sheet

4_leaf

  • MagnaPrint® Discharge Base ULF – clear discharge base for strong, bright shades.
  • MagnaPrint® Discharge Blending White ULF – semi white discharge base for pastel shades can also be used as discharge underbase.
  • MagnaPrint® Discharge Super White ULF – ready made white discharge base for white shades.

Patented Formaldehyde Free Discharge System.

Data Sheet

4_leaf

Magna Colours Printing Systems

Bases

  • MagnaPrint® Discharge Base ULF – clear discharge base for strong, bright shades.
  • MagnaPrint® Discharge Blending White ULF – semi white discharge base for pastel shades can also be used as discharge underbase.
  • MagnaPrint® Discharge Super White ULF – ready made white discharge base for white shades.
  • Activator M – discharge activator powder used at 6% shelf life of bases after activation is up to 4-5 hours dependant on room temperature).

The bases are fully compatible with each other and can be mixed in any ratio to achieve the required brightness of print.

Data Sheet

4_leaf

The Aquaplas CMJ Range has been designed to give a print with a similar look and properties of a conventional plastisol print. The Aquaplas CMJ Range is fully compatible with Eco Pigments and can be mixed with other water based products on the Magna Range.

Data Sheet

4_leaf

Mock soft handle discharge system. MagnaPrint® HB System is a brand new development from MagnaColours® Ltd.

Due to customers experiencing issues with the poor quality of discharge fabrics, MagnaPrint® HB has been developed as a type of mock discharge system that produces discharge look prints with a soft hand on non discharge fabric. Printed on top of either a Discharge or AquaPlasWhite FF underbase (dependant on fabric). MagnaPrint® HB system can be printed through high mesh counts – up to 100 (255) mesh for best results, and therefore has a very low ink consumption resulting in soft hand and extremely cost effective prints.

Data Sheet

4_leaf

MagnaPrint® High Density is water based print ink recommended for raised, high build effects.

The MagnaPrint® High Density range consists of following products: MagnaPrint® High Density White – ready made white opaque paste. MagnaPrint® High Density Neutral – ready made clear base for strong, bright shades. The bases are fully compatible with each other and can be mixed in any ratio to achieve the required opacity and brightness of print. MagnaPrint® Eco Pigments can be added in order to achieve a desired shade.

Data Sheet

4_leaf

Magna Advanced Print Range has been designed to extend the screen time in comparison to other water based formulations and permit lower temperature drying/curing conditions of the print whilst maintaining good wash durability. The Advanced Print Range is fully compatible with Eco Pigments and can be mixed with other water based products on the Magna Range.

Data Sheet

4_leaf

ND Extra is a non-drying ready made pigment paste suitable for printing on white (light) backgrounds. It has been developed specifically for high mesh count screens counts and gives super sharp print mark, ultra soft handle with excellent wash durability.

Data Sheet

4_leaf

Whites

Magna Advanced Print Range has been designed to extend the screen time in comparison to other water based formulations and permit lower temperature drying/curing conditions of the print whilst maintaining good wash durability. The Advanced Print Range is fully compatible with Eco Pigments and can be mixed with other water based products on the Magna Range.

Data Sheet

4_leaf

High Solids PVC free for Process / tonal artwork MagnaPrint® AquaFlex V2 Range is a high solids water based ink for printing on light or coloured backgrounds. It has been designed to give excellent print performance and open time on high mesh screens. MagnaPrint® AquaFlex White V2– is a ready to print opaque white paste. This can be used as underbase or highlight white, or pigmented to achieve pastel shades. MagnaPrint® AquaFlex Neutral V2 – is a ready made clear base for strong, bright shades.

Data Sheet

4_leaf

The Aquaplas CMJ Range has been designed to give a print with a similar look and properties of a conventional plastisol print. The Aquaplas CMJ Range is fully compatible with Eco Pigments and can be mixed with other water based products on the Magna Range.

Data Sheet

4_leaf

MagnaPrint® High Density is water based print ink recommended for raised, high build effects. The MagnaPrint® High Density range consists of following products: MagnaPrint® High Density White – ready made white opaque paste. MagnaPrint® High Density Neutral – ready made clear base for strong, bright shades. The bases are fully compatible with each other and can be mixed in any ratio to achieve the required opacity and brightness of print. MagnaPrint® Eco Pigments can be added in order to achieve a desired shade.

Data Sheet

4_leaf

High Solids Ready to Use Stretch Ink.  The MagnaPrint® UltraStretch Range is a high solids water based ink designed to give superb elasticity on knitted fabrics. It gives a good degree of coverage/hiding power and excellent washing fastness.

Data Sheet

4_leaf

Magna Colours Speciality

Additives

MagnaPrint® Crosslinker 100 can be used to considerably reduce the time of curing pigment prints. It is compatible with most MagnaPrint® printing systems. MagnaPrint® Crosslinker 100 is particularly useful where dryers have insufficient dwell time.

Data Sheet

4_leaf

Low temperature Cure Crosslinker
MagnaPrint® Crosslinker 200 can be used to considerably reduce the time or temperature of curing pigment prints.
MagnaPrint® Crosslinker 200 is particularly useful where dryers have insufficient dwell time or when reduced curing temperatures are necessary to avoid colour migration.

Data Sheet

4_leaf

Improves print penetration on water resistant fabrics.
MagnaPrint® Hydrophil M is a wetting agent compatible with all MagnaPrint® bases. It is used when it is necessary to obtain good penetration/push through eg on Terry Towelling fabrics, or to produce double sided effects on light weight materials.

Data Sheet

4_leaf

Additive to prevent Screen blocking/choking. MagnaPrint® Retardant Gel is an additive to increase open time of ink in the Screen.
MagnaPrint® Retardant Gel is compatible with all MagnaPrint® Bases.

Data Sheet

4_leaf

Handle and runnability additive.  MagnaPrint® Bases to improve the handle of the finished print. At the same time it improves the dry rub fastness without adversely affecting the wet rub.
MagnaPrint® Softener TS Conc also improves runnability and prevents drying in /choking in the screen without any adverse effect on flash performance of the ink.

Data Sheet

4_leaf

Thickener for increasing product viscosity. MagnaPrint® Thickener CSP is a high efficiency multifunctional thickener developed specifically for the Textile Printing Industry. It is supplied as a high purity Inverse Emulsion of synthetic acrylic copolymers.

Data Sheet

4_leaf

Pigments

Pigment concentrates for use with our MagnaPrint® Bases. High Concentration, Strong build-up, High Brilliancy, Constant low viscosity, Excellent dispersion stability, Tight particle size distribution.

Ecological Responsible Care: APEO and Ethylenglycol free formulations

Data Sheet

4_leaf

Pigment concentrates for use with our MagnaPrint® Bases. Pigment concentrates for use with our MagnaPrint® Bases

Product Properties: High Concentration,Strong build-up, High Brilliancy, Constant low viscosity, Excellent dispersion stability, Tight particle size distribution.

Data Sheet

4_leaf

Printing Bases

Ready to use Metallic Printing Pastes. MagnaPrint® Bling products are a ready to use metallic print pastes that has excellent shine and elasticity. The range consists of the following products:

  • MagnaPrint® Bling Silver
  • MagnaPrint® Bling Gold
  • MagnaPrint® Bling Bronze
Data Sheet

4_leaf

Water based adhesive for Foil/Flock papers and Transfers.

Data Sheet

4_leaf

Devore effect on suitable polyester / cotton fabrics.

Data Sheet

4_leaf

Vintage Crackle Effect – Crack by Hand. MagnaPrint® Chalkboard is a ready made, elastic binder specially formulated to allow the wearer to draw on the printed area using chalks. Chalks can be removed with a damp cloth or in the washing machine.

Data Sheet

4_leaf

Vintage Crackle Effect – Crack by Hand. The MagnaPrint® Crackle range is a fully aqueous ready to use printing pastes. The range consists of a CLEAR and a WHITE designed to give a print effect with a “cracked, aged” appearance on knitted/stretchy fabrics.

Data Sheet

4_leaf

The MagnaPrint® Brittle Bases are fully aqueous ready to use printing pastes. The range consists of a Clear and a White designed to give a print effect with a ‘cracked-aged’ appearance on knitted/stretchy fabrics. MagnaPrint® Eco Pigments can be added in order to achieve a desired shade. The White may also be used pure to give a white effect.

Data Sheet

4_leaf

Ready to use print paste for wax batik effect. MagnaPrint® Resist Paste has been developed to simulate a wax Batik style of printing where a print is over dyed allowing the printed area to resist any of the colours from the dye bath. It is designed to work best on cellulosic fibres which are subsequently dyed with direct or reactive dyestuffs.

Data Sheet

4_leaf

Ready to use Puff Paste. MagnaPrint® Expanding LT is a ready to use water based print paste for achieving foam or puff effects.

Data Sheet

4_leaf

Ready to use Glitter Paste. MagnaPrint® Glitter Base AP is a ready to use print paste with a high gloss finish, soft handle and excellent wash fastness. Any Shade of glitter can be achieved by tinting the paste with MagnaPrint® Eco Pigments. MagnaPrint® Glitter Base AP can also be printed directly or used as a overptint on pre printed colours.

4_leaf

Clear Base for Glitter effects. MagnaPrint® Glitter Binder QPUK is a ready made, clear, elastic binder specially formulated for glitter effects.

Data Sheet

4_leaf

Glow in the Dark Paste. MagnaPrint® Glow Neutral is a ready to use phosphorescent printing paste for glow in the dark effects. To enhance the effect a small amount of fluorescent pigment can be added into the paste.

Data Sheet

4_leaf

High fastness binder for use with Metallic Powders. MagnaPrint® Goldbinder SFN is a ready to use solventless printing paste for use with metallic powders pastes. It provides very brilliant effects, which do not tarnish on exposure to air.

Data Sheet

4_leaf

Glossy Ready to Use Waterbased Printing Paste. MagnaPrint® High Gloss a ready to use waterbased printing paste. MagnaPrint® High Gloss is used to obtain glossy effects on coloured substrates. MagnaPrint® High Gloss can be coloured with MagnaPrint® Pigments, pearls or glitters to achieve interesting visual effects.

Data Sheet

4_leaf

Ready to print Pearlescent Pastes. MagnaPrint® Pearl are a ready to use print paste containing speciality pigments to obtain a “metallic like” effect.

Data Sheet

4_leaf

Ready to use Reflective Ink for Bright Shades. MagnaPrint® Reflective Clear is a ready to use waterbased textile printing ink containing micro glass beads which reflect light. MagnaPrint® Reflective Clear can be coloured with MagnaPrint® Eco Pigments and printed directly onto light coloured fabric or a underbase such as Aquplas FF for dark fabrics. Alternatively it can be used as a final overprint on multi coloured designs

Data Sheet

4_leaf

Ready to use Reflective Ink. MagnaPrint® Reflective SB is a ready to use waterbased textile printing ink containing micro glass beads which reflect light. MagnaPrint® Eco Pigments can be added to achieve desired effect at a maximum level of 2-3%, exceeding these levels may detract from reflectivity.

Data Sheet

4_leaf

Soft Handle Opaque Base for Mud Crack Effects. MagnaPrint® Self Crack has been developed to re-create the effect of old varnish that cracks and crazes over time to produce a “cracked/aged” appearance.

Data Sheet

4_leaf

Ready to use Puff Paste with Suede Hand Feel. MagnaPrint® Suede Foam is a ready to use water based printing paste to achieve suede/mock flock effect.

Data Sheet

4_leaf

Ready to print Pearlescent Pastes. MagnaPrint® Pearl TT. Ready to print stretchy two tone pearlescent pastes. MagnaPrint® Pearl TT is a range of ready to use print pastes containing speciality pigments to obtain a “two tone” effect when printed on stretchy or Lycra containing fabrics.

Data Sheet

4_leaf