sef

Tatoo

Tatoo is  an opaque polyurethane film. Very light, very stretchable with high washing fastness. Suitable for eco-solvent, solvent, latex and UV printing. Tatoo is PVC free.

Printing Tatoo

Choose the right profile, for Roland printers – for example TTRH – Garment Heat Transfer profile. Switch off the heating, it will dry fast, anyway.

Cutting Tatoo

In case of small details to be cut in areas with a lot of ink, try to cut first, return to base point and print then. This is not a standard procedure, but it actually works very well.

Fastness of Tatoo

In order to achieve maximum washing fastness with Tatoo Plus (7 seconds @ 165 degrees) we recommend a short re-pressing (15 secs) after peeling off the tape, with the Tatoo Plus graphic in direct contact with the heat press. You can re-press Tatoo Plus without any protective material, Tatoo Plus will not stick or transfer inks to the heat press.

Features

  • Opaque flex film with incredible touch
  • Waterbased PU
  • Thickness (without liner): 60μ
  • Printable with Ecosolvent, Solvent, Latex and UV-Inks
  • Transfer Temperature: 165°C (330°F)
  • Transfer Time: 7 seconds + 15 seconds repressing without the tape (direct contact with the press)
  • Pressure: Medium/High Fastness: 60°C

OR

  • Transfer Temperature: 165°C (330°F)
  • Transfer Time: 17 seconds
  • Pressure: Medium/High
  • Fastness: 40°C

SUITABLE FOR STANDARD TEXTILES

Application

Cotton & polyester