Tatoo Plus

Tatoo Plus is  high-quality, multi-layer polyurethane film on polyester liner. It is printable with Solvent, Eco-Solvent (including TrueVis) and UV inks. It has a matte finish, high elasticity and an excellent touch. Even large designs can be applied without loss of wearing comfort. 


Printing Tatoo Plus

Tatoo Plus is primarily processed on so-called hybrid printers which can print and cut. Iit can however, also be pricessed on seperate machines without any problems. The ink should be dry before transferring to the tape. 

Cutting Tatoo Plus

In case of small details to be cut in areas with a lot of ink, try to cut first, return to base point and print then. This is not a standard procedure, but it actually works very well.

Fastness of Tatoo Plus

In order to achieve maximum washing fastness with Tatoo Plus (7 seconds @ 165 degrees) we recommend a short re-pressing (15 secs) after peeling off the tape, with the Tatoo Plus graphic in direct contact with the heat press. You can re-press Tatoo Plus without any protective material, Tatoo Plus will not stick or transfer inks to the heat press.


  • Opaque flex film with incredible touch
  • Waterbased PU
  • Thickness (without liner): 60μ
  • Printable with Ecosolvent, Solvent, Latex and UV-Inks
  • Transfer Temperature: 165°C (330°F)
  • Transfer Time: 7 seconds + 15 seconds repressing without the tape (direct contact with the press)
  • Pressure: Medium/High Fastness: 60°C


  • Transfer Temperature: 165°C (330°F)
  • Transfer Time: 17 seconds
  • Pressure: Medium/High
  • Fastness: 40°C



Cotton & polyester